Bifold Barn Door Install

Bifold Barn Door Installation Guide WITH STRAIGHT STRAP HARDWARE KIT

14 FINAL ADJUSTMENTS FOR FIXED PULLEY Tighten the screw fully until it is properly torqued. Failing to tighten the pin completely may cause it to loosen over time. Additionally, ensure the pin is securely screwed in so that the screw holds the latch of the front strap in place. Fixed Pulley

Note: The pulley should have the screw pre-installed, but it still needs to be tightened.

Fixed Pulley

2mm Allen Wrench

1

Important: Make sure screw in visual 1 is fully screwed in. Failing to screw the pin all the way in may cause it to loosen over time, potentially leading to the slab detaching from the pulley.

Adjustable Wrench

2mm

Fixator

Align the hole of the fixator piece with the lower hole of the hanger roller plate. Use an adjustable wrench to reinstall the fixator screw into the fixed pulley.

2

1-800-663-DOOR masonite.com

©2025 Masonite Corporation. RES-23036

11 of 13