Bifold Barn Door Install

Bifold Barn Door Installation Guide WITH STRAIGHT STRAP HARDWARE KIT

5 ATTACH MOUNTING BOARD TO WALL (FOR DRY WALL INSTALLATION ONLY)

Attach mounting board to wall using Phillips bit and #10 2-1/2" wood screws .

10x #10 2-1/2" Wood Screw

Phillips Bit

Note: The number of wood screws needed may vary.

Cordless Drill

6 DRILL HOLES INTO MOUNTING BOARD FOR TRACK (FOR DRY WALL INSTALLATION ONLY)

Once the mounting board is installed, center the track above the door opening and mark the track holes on the mounting board with a with a pencil.

3/16" Bit

Use a 3/16" bit to drill pilot holes through mounting board and into drywall.

Cordless Drill

7 ATTACH TRACK TO MOUNTING BOARD (FOR DRY WALL INSTALLATION ONLY)

With an assistant holding track, attach spacers, track, and washers to mounting board with the wall screw and 1/2” wrench. Note: Use the ST8x110 Anchor if the wall screw does not secure into a stud.

3X Washer

3x Wall Spacer

3x 10 Wall Screw

1/2" Socket Wrench

Track

3x ST8x110 Anchor Wall

1-800-663-DOOR masonite.com

©2025 Masonite Corporation. RES-23036

4 of 13